Коммутатор Cisco MDS C9148T-48PETK9

Поставляется с 48 активированными портами 4, 8, 16 и 32 Гбит/с. Cisco MDS 9148T Multilayer Fabric Switch - доступный, универсальный, легко управляемый коммутатор для сетей SAN начального уровня и для сетей отделов предприятий. Коммутатор, выполненный на специализированных ИС для сетей хранения типа «коммутатор на кристалле», обеспечивает выделенную полосу пропускания Fibre Channel 16 Гбит/с на каждом из 48 портов Cisco MDS 9148T. Для простоты заказа он поставляется в полной 48-портовой конфигурации. Для упрощения настройки готового решения предусмотрен мастер быстрой настройки Quick Configuration Wizard. Предусмотрены такие функции корпоративного класса, как неразрушающая модернизация, виртуальные SAN (VSAN), межсетевая маршрутизация Inter-VSAN Routing (IVR), обеспечение качества обслуживания QOS, агрегирование каналов (Port Channels), виртуализация портов N-Port ID Virtualization (NPIV). Для обеспечения высокой доступности установлены резервированные блоки питания и вентиляторы, допускающие замену в "горячем" режиме. Protocols: Fibre Channel standards ● FC-PH, Revision 4.3 (ANSI INCITS 230-1994) ● FC-PH, Amendment 1 (ANSI INCITS 230-1994/AM1-1996) ● FC-PH, Amendment 2 (ANSI INCITS 230-1994/AM2-1999) ● FC-PH-2, Revision 7.4 (ANSI INCITS 297-1997) ● FC-PH-3, Revision 9.4 (ANSI INCITS 303-1998) ● FC-PI, Revision 13 (ANSI INCITS 352-2002) ● FC-PI-2, Revision 10 (ANSI INCITS 404-2006) ● FC-PI-3, Revision 4 (ANSI INCITS 460-2011) ● FC-PI-4, Revision 8 (ANSI INCITS 450-2008) ● FC-PI-5, Revision 6 (ANSI INCITS 479-2011) ● FC-PI-6 (ANSI INCITS 512-2015) ● FC-FS, Revision 1.9 (ANSI INCITS 373-2003) ● FC-FS-2, Revision 1.01 (ANSI INCITS 424-2007) ● FC-FS-2, Amendment 1 (ANSI INCITS 424-2007/AM1-2007) ● FC-FS-3, Revision 1.11 (ANSI INCITS 470-2011) ● FC-FS-4 ● FC-LS, Revision 1.62 (ANSI INCITS 433-2007) ● FC-LS-2, Revision 2.21 (ANSI INCITS 477-2011) ● FC-LS-3, Includes revision 3.53 ● FC-SW-2, Revision 5.3 (ANSI INCITS 355-2001) ● FC-SW-3, Revision 6.6 (ANSI INCITS 384-2004) ● FC-SW-4, Revision 7.5 (ANSI INCITS 418-2006) ● FC-SW-5, Revision 8.5 (ANSI INCITS 461-2010) ● FC-SW-6 ● FC-GS-3, Revision 7.01 (ANSI INCITS 348-2001) ● FC-GS-4, Revision 7.91 (ANSI INCITS 387-2004) ● FC-GS-5, Revision 8.51 (ANSI INCITS 427-2007) ● FC-GS-6, Revision 9.4 (ANSI INCITS 463-2010) ● FC-GS-7, Includes revision 10.8 ● FCP, Revision 12 (ANSI INCITS 269-1996) ● FCP-2, Revision 8 (ANSI INCITS 350-2003) ● FCP-3, Revision 4 (ANSI INCITS 416-2006) ● FCP-4, Revision 2b (ANSI INCITS 481-2011) ● FC-SB-2, Revision 2.1 (ANSI INCITS 349-2001) ● FC-SB-3, Revision 1.6 (ANSI INCITS 374-2003) ● FC-SB-3, Amendment 1 (ANSI INCITS 374-2003/AM1-2007) ● FC-SB-4, Revision 3.0 (ANSI INCITS 466-2011) ● FC-SB-5, Revision 2.00 (ANSI INCITS 485-2014) ● FC-BB-6, Revision 2.00 (ANSI INCITS 509-2014) ● FC-BB-2, Revision 6.0 (ANSI INCITS 372-2003) ● FC-BB-3, Revision 6.8 (ANSI INCITS 414-2006) ● FC-BB-4, Revision 2.7 (ANSI INCITS 419-2008) ● FC-BB-5, Revision 2.0 (ANSI INCITS 462-2010) ● FC-VI, Revision 1.84 (ANSI INCITS 357-2002) ● FC-SP, Revision 1.8 (ANSI INCITS 426-2007) ● FC-SP-2, Revision 2.71 (ANSI INCITS 496-2012) ● FAIS, Revision 1.03 (ANSI INCITS 432-2007) ● FAIS-2, Revision 2.23 (ANSI INCITS 449-2008) ● FC-IFR, Revision 1.06 (ANSI INCITS 475-2011) ● FC-FLA, Revision 2.7 (INCITS TR-20-1998) ● FC-PLDA, Revision 2.1 (INCITS TR-19-1998) ● FC-Tape, Revision 1.17 (INCITS TR-24-1999) ● FC-MI, Revision 1.92 (INCITS TR-30-2002) ● FC-MI-2, Revision 2.6 (INCITS TR-39-2005) ● FC-MI-3, Revision 1.03 (INCITS TR-48-2012) ● FC-DA, Revision 3.1 (INCITS TR-36-2004) ● FC-DA-2, Revision 1.06 (INCITS TR-49-2012) ● FC-MSQS, Revision 3.2 (INCITS TR-46-2011) ● Fibre Channel classes of service: Class 2, Class 3, and Class F ● Fibre Channel standard port types: E, F, and B ● Fibre Channel enhanced port types: SD, ST, and TE ● FC-NVMe ● In-band management using IP over Fibre Channel (RFC 2625) ● IPv6, IPv4, and Address Resolution Protocol (ARP) over Fibre Channel (RFC 4338) ● Extensive IETF-standards-based TCP/IP, Simple Network Management Protocol Version 3 (SNMPv3), and Remote Monitoring (RMON) MIBs Ports: ● Fixed-switch form factor with 48 SFP+ ports base ● Entry-level 24-port preactivated base model with flexibility to turn on any 24 ports ● Incremental ports ◦ 8-ports upgrade license offers the option of upgrading to 32, 40, and 48 ports Security: ● VSAN fabric isolation ● Intelligent packet inspection at port level ● Hardware zoning by Access Control Lists (ACLs) ● Fibre Channel Security Protocol (FC-SP) switch-to-switch authentication ● FC-SP host-to-switch authentication ● Role-based access control (RBAC) using RADIUS, TACACS+, or Lightweight Directory Access Protocol (LDAP) authentication, authorization, and accounting (AAA) functions ● Secure FTP (SFTP) ● Secure Shell Protocol Version 2 (SSHv2) ● Simple Network Management Protocol Version 3 (SNMPv3) implementing Advanced Encryption Standard (AES) ● Control-plane security ● Cisco TrustSec® payload encryption ● Secure Boot and Anti-counterfeit technology Performance: ● Port speed: 4-, 8-, 16-, and 32-Gbps autosensing with 32 Gbps of dedicated bandwidth per port ● Aggregate bandwidth of 1.5-Tbps end-to-end full duplex ● Buffer credits: Up to 8300 for a group of 16 ports, with a default of 500 buffer credits per port and a maximum of 8270 buffer credits for a single port in the group ● Port groups: 3 port groups of 16 ports each ● Port channel: Up to 16 load-balanced physical links grouped in one port channel Diagnostics: ● Power-On-Self-Test (POST) diagnostics ● Online Health Management System (OHMS) diagnostics ● Internal loopbacks ● SPAN ● Fibre Channel traceroute ● Fibre Channel ping ● Fibre Channel debug ● Cisco Fabric Analyzer ● Syslog ● Port-level statistics ● Link diagnostics (E-port and F-port links) ● Read Diagnostic Parameter Serviceability: ● Configuration file management ● Call Home ● Port beaconing ● Link cable beacon ● System LEDs ● SNMP traps for alerts Reliability and availability: ● Cisco In-Service Software Upgrade (ISSU) ● Hot-swappable, dual redundant power supplies ● Hot-swappable fan tray with switch integrated temperature and power management ● Hot-swappable SFP+ optics ● Stateful process restart ● Any port configuration for port channels ● Fabric-based multipathing ● Per-VSAN fabric services ● Port tracking ● Virtual Router Redundancy Protocol (VRRP) for management IP interface ● FEC with HBA ports ● Buffer-to-buffer state change notification with HBA ports Network management: ● Management access through 2 out-of-band Ethernet ports ◦ mgmt0: 10/100/1000BASE-T port ◦ mgmt1: 1/10G SFP+ port# ● RS-232 serial console port ● USB power-on auto-provision port ● Access protocols ● Command-Line Interface (CLI) using the console and Ethernet port ● SNMPv3 using the Ethernet port and in-band IP over Fibre Channel access ● Storage Networking Industry Association (SNIA) Storage Management Initiative Specification (SMI-S) ● NX-API for REST ● full access through HTTPS REST ● Distributed device alias service ● Network security ● Per-VSAN RBAC using LDAP, RADIUS, and TACACS+-based AAA functions ● Simple File Transfer Protocol (SFTP) ● SSHv2 implementing AES ● SNMPv3 implementing AES ● Cisco Data Center Network Manager (DCNM) Programming interfaces: ● Scriptable CLI ● Cisco DCNM web services API ● NX-API RESTful interfaces ● Onboard Python interpreter ● Cisco Embedded Event Manager (EEM) ● Cisco NX-OS Software scheduler Physical dimensions (HxWxD): ● 1 Rack Unit (1RU) (1.72 x 17.3 x 22.3 in. [4.37 x 43/9 x 56.6 cm]) excluding Power Supply Unit (PSU) and fan-tray handles ● 16.7 lb. (8.5 kg) Power: ● 80 Plus Platinum certified power supplies ● Power supply options ◦ 650W AC in base model, port-side exhaust variant (2 per switch) ◦ 650W AC in base model, port-side intake variant (2 per switch) ● Power cord ◦ IEC60320 C14 plug on 650W power supply connecting to a notched C15 socket connector (check Table 6 later in this document for power cords specific to regions) ● AC input: 100 to 240 VAC (10% range) ● Frequency: 50 to 60 Hz (nominal) ● Typical power consumption ◦ 217W for Idle 48-Port switch without optics modules ◦ 251W for 48-Port switch with 24 32G SW optics modules under typical conditions ◦ 297W for 48-Port switch with 48 32G SW optics modules under typical conditions ● Airflow ◦ Back to front (toward ports) using port-side exhaust fans ◦ Front to back (inward from ports) using port-side intake fans ◦ 50 Cubic Feet per Minute (CFM) through system fan assembly at 77°F (25°C) ◦ 100 CFM maximum Temperature range: ● Temperature, ambient operating: ◦ 32 to 104°F (0 to 40°C) with port-side exhaust and intake airflow variants ● Temperature, ambient nonoperating and storage: –40 to 158°F (–40 to 70°C) ● Relative humidity, ambient (noncondensing) operating: 10 to 90% ● Relative humidity, ambient (noncondensing) nonoperating and storage: 10 to 95% ● Altitude, operating: –197 to 6500 ft (–60 to 2000m) Approvals and compliance: ● Safety compliance ● CE Marking ● UL 60950 ● CAN/CSA-C22.2 No. 60950 ● EN 60950 ● IEC 60950 ● TS 001 ● AS/NZS 3260 ● IEC60825 ● EN60825 ● 21 CFR 1040 ● EMC compliance ● FCC Part 15 (CFR 47) Class A ● ICES-003 Class A ● EN 55022 Class A ● CISPR 22 Class A ● AS/NZS 3548 Class A ● VCCI Class A ● EN 55024 ● EN 50082-1 ● EN 61000-6-1 ● EN 61000-3-2 ● EN 61000-3-3 Fabric services: ● Name server ● Registered State Change Notification (RSCN) ● Login services ● Fabric Configuration Server (FCS) ● Broadcast ● In-order delivery Advanced functions: ● VSAN ● IVR ● Port Channel with multipath load balancing ● Flow- and zone-based QoS