Коммутатор Cisco MDS 9148
71 900 ₽
Поставщик
Для физических лиц
Для юридических лиц
Ответим в течение 30 минут · Пн–Пт 09:00–19:00 МСК
Многоуровневый коммутатор Cisco MDS 9148 c 48 портами Fiber Channel, поддерживающих линейную скорость до 8 Гбит/с.
Поставляется с 48 активированными портами 2, 4 и 8 Гбит/с., В комплекте 2 блока питания AC Cisco MDS 9148 Multilayer Fabric Switch - доступный, универсальный, легко управляемый коммутатор для сетей SAN начального уровня и для сетей отделов предприятий. Коммутатор, выполненный на специализированных ИС для сетей хранения типа «коммутатор на кристалле», обеспечивает выделенную полосу пропускания Fibre Channel 8 Гбит/с на каждом Cisco MDS 9148 поставляется в полной 48-портовой конфигурации. Minimum software requirements ●Cisco MDS 9000 NX-OS Software Release 5.0(1) supporting Cisco MDS 9148 and Cisco Fabric Manager ● Cisco MDS 9000 NX-OS Release 5.2(1) supporting Cisco DCNM for SAN ● Zero-touch installation capability is scheduled for a future release of Cisco MDS 9000 NX-OS Software Performance and port configuration ● Port speed: 8-, 4-, 2-, and 1-Gbps autosensing with 8 Gbps of dedicated bandwidth per port ● Buffer credits: Up to 128 for a group of 4 ports, with a default of 32 buffer credits per port and a maximum of 125 buffer credits for a single port in the group ● Ports per chassis: Up to 48 8-Gbps ports ◦ Base configuration with 16 ports; additional configurations for 32 and 48 ports available ◦ Upgrade ports in 8-port increments from any configuration with the port activation license ● PortChannel: Up to 16 ports in a PortChannel with automatic load balancing Security ● VSAN fabric isolation ● Intelligent packet inspection @ port level ● Hardware zoning by access control lists (ACLs) ● Extended broadcast zoning ● FC-SP switch-to-switch authentication ● FC-SP host-to-switch authentication ● RBAC using RADIUS or TACACS+ authentication, authorization, and accounting (AAA) functions ● Management access ● Secure FTP (SFTP) ● Secure Shell Version 2 (SSHv2) ● Simple Network Management Protocol Version 3 (SNMPv3) implementing Advanced Encryption Standard (AES) ● Control-plane security Virtual Computing Environment (VCE) coalition Cisco MDS 9148 is supported as a VCE coalition option for Vblock1®, Vblock2®, Vblock™ 300, and Vblock™ 700 Compatibility Fibre Channel protocols ● FC-PH, Revision 4.3 (ANSI/INCITS 230-1994) ● FC-PH, Amendment 1 (ANSI/INCITS 230-1994/AM1 1996) ● FC-PH, Amendment 2 (ANSI/INCITS 230-1994/AM2-1999) ● FC-PH-2, Revision 7.4 (ANSI/INCITS 297-1997) ● FC-PH-3, Revision 9.4 (ANSI/INCITS 303-1998) ● FC-PI, Revision 13 (ANSI/INCITS 352-2002) ● FC-PI-2, Revision 10 (ANSI/INCITS 404-2006) ● FC-PI-3, Revision 2.1 (BSR INCITS 460-200x) ● FC-PI-4, Revision 8.0 (INCITS 450-2009) ● FC-FS, Revision 1.9 (ANSI/INCITS 373-2003) ● FC-FS-2, (BSR INCITS 424-200x) ● FC-FS-3, Revision 0.9 (BSR INCITS PN-1861-D-200x) ● FC-LS, Revision 1.62 (ANSI/INCITS 433-2007) ● FC-AL, Revision 4.5 (ANSI/INCITS 272-1996) ● FC-AL-2, Revision 7.0 (ANSI/INCITS 332-1999) ● FC-AL-2, Amendment 1 (ANSI/INCITS 332-1999/AM1-2003) ● FC-AL-2, Amendment 2 (ANSI/INCITS 332-1999/AM2-2006) ● FC-SW-2, Revision 5.3 (ANSI/INCITS 355-2001) ● FC-SW-3 , Revision 6.6 (ANSI/INCITS 384-2004) ● FC-SW-4, Revision 7.5 (ANSI/INCITS 418-2006) ● FC-SW-5, (BSR INCITS 461-200x) ● FC-GS, (ANSI INCITS 288-1999) ● FC-GS-3, Revision 7.01 (ANSI/INCITS 348-2001) ● FC-GS-4, Revision 7.91 (ANSI/INCITS 387-2004) ● FC-GS-5, (ANSI INCITS 427-2007) ● FC-GS-6, (BSR INCITS 463-200x) ● FC-BB, Revision 4.7 (ANSI/INCITS 342-2001) ● FC-BB-2, Revision 6.0 (ANSI/INCITS 372-2003) ● FC-BB-3, Revision 6.8 (ANSI/INCITS 414-2006) ● FCP, Revision 12 (ANSI/INCITS 269-1996) ● FCP-2, Revision 8 (ANSI/INCITS 350-2003) ● FCP-3, Revision 4 (ANSI/INCITS 416-2006) ● FCP-4, (BSR INCITS PN-1828-D-200x) ● FC-SB-2, Revision 2.1 (ANSI/INCITS 349-2001) ● FC-SB-3, Revision 1.6 (ANSI/INCITS 374-2003) ● FC-VI, Revision 1.84 (ANSI/INCITS 357-2002) ● FC-FLA, Revision 2.7 (INCITS TR-20-1998) ● FC-PLDA, Revision 2.1 (INCITS TR-19-1998) ● FC-Tape, Revision 1.17 (INCITS TR-24-1999) ● FC-MI, Revision 1.92 (INCITS TR-30-2002) ● FC-MI-2, Revision 2.6 (INCITS TR-39-2005) ● FC-SP, Revision 1.6 (ANSI/INCITS 426-2007) ● FC-DA, Revision 3.1 (INCITS TR-36-2004) ● SNPing (ANSI INCITS 443-2008) ● MIB-FA (INCITS/TR-32:2003 (R2008)) ● FAIS Revision 1 ● Extensive IETF-standards-based TCP/IP, SNMPv3, and Remote Monitoring (RMON) MIBs ● Class of service: Classes 2, 3, and F ● Fibre Channel standard port types: E, F, and FL ● Fibre Channel enhanced port types: SD, and TE Fabric services ● Name server ● Registered state change notification (RSCN) ● Login services ● Broadcast ● In-order delivery ● Name-server zoning Advanced services ● NPIV ● VSANs ● PortChannels ● NPV mode ● FlexAttach ● F-port trunking and channeling ● IVR Diagnostics and troubleshooting tools ● POST diagnostics ● Online diagnostics ● Internal loopbacks ● SPAN (remote SPAN not supported) ● Fibre Channel traceroute ● Fibre Channel ping ● Fibre Channel debug ● Cisco Fabric Analyzer ● Syslog ● Port-level statistics Management ● Access methods ◦ Out-of-band 10/100/1000 Ethernet port ◦ EIA/TIA-232 serial console port ◦ In-band management using IP over Fibre Channel ● Access protocols ◦ CLI ◦ SNMP ◦ SMI-S ● Security ◦ RBAC using RADIUS or TACACS+ authentication, authorization, and accounting (AAA) functions ◦ VSAN-based roles ◦ SSHv2 ◦ SNMPv3 Management applications ● Zero-Touch Installation deployment and provisioning with DHCP (scheduled for a future release of Cisco MDS 9000 NX-OS Software) ● Cisco MDS 9000 Family CLI ● Quick Configuration Wizard ● Cisco Device Manager ● Cisco DCNM for SAN Essentials Edition ● Cisco DCNM for SAN Advanced Edition (optional software package) Availability ● Nondisruptive In-Service Software Upgrade (ISSU) ● Process monitoring and stateful process restart ● Per-VSAN fabric services ● Redundant, hot-swappable power supplies and redundant, hot-swappable power supply and fan trays ● Hot-swappable SFP and SFP+ optics ● PortChannels aggregating up to 16 ports with redundant load balancing ● F-port channeling and trunking ● Online diagnostics Serviceability ● Configuration file management ● Call Home ● Port beaconing ● System LEDs ● SNMP traps for alerts Environmental ● Physical dimensions (H x W x D) of 1RU: 1.72 x 17.16 x 18.89 in. (4.47 x 43.59 x 47.98 cm) ● Weight of switch with dual power supplies: 22.2 lb (10 kg) ● Ambient operating temperature: 32 to 104°F (0 to 40°C) ● Ambient nonoperating temperature: -40 to 158°F (-40 to 70°C) ● Humidity (RH), ambient (noncondensing) operating: 10 to 90% ● Humidity (RH), ambient (noncondensing) nonoperating and storage: 5 to 95% ● Operating altitude: -197 to 6500 ft (-60 to 2000m) Power and cooling ● Power supplies (300W AC) (maximum of 2 per switch) ◦ AC Input: 100 to 240 VAC nominal (+/-10% for full range) ◦ Frequency: 50 to 60 Hz nominal (+/-3 Hz for full range) ◦ Maximum power consumption:
Поставляется с 48 активированными портами 2, 4 и 8 Гбит/с., В комплекте 2 блока питания AC Cisco MDS 9148 Multilayer Fabric Switch - доступный, универсальный, легко управляемый коммутатор для сетей SAN начального уровня и для сетей отделов предприятий. Коммутатор, выполненный на специализированных ИС для сетей хранения типа «коммутатор на кристалле», обеспечивает выделенную полосу пропускания Fibre Channel 8 Гбит/с на каждом Cisco MDS 9148 поставляется в полной 48-портовой конфигурации. Minimum software requirements ●Cisco MDS 9000 NX-OS Software Release 5.0(1) supporting Cisco MDS 9148 and Cisco Fabric Manager ● Cisco MDS 9000 NX-OS Release 5.2(1) supporting Cisco DCNM for SAN ● Zero-touch installation capability is scheduled for a future release of Cisco MDS 9000 NX-OS Software Performance and port configuration ● Port speed: 8-, 4-, 2-, and 1-Gbps autosensing with 8 Gbps of dedicated bandwidth per port ● Buffer credits: Up to 128 for a group of 4 ports, with a default of 32 buffer credits per port and a maximum of 125 buffer credits for a single port in the group ● Ports per chassis: Up to 48 8-Gbps ports ◦ Base configuration with 16 ports; additional configurations for 32 and 48 ports available ◦ Upgrade ports in 8-port increments from any configuration with the port activation license ● PortChannel: Up to 16 ports in a PortChannel with automatic load balancing Security ● VSAN fabric isolation ● Intelligent packet inspection @ port level ● Hardware zoning by access control lists (ACLs) ● Extended broadcast zoning ● FC-SP switch-to-switch authentication ● FC-SP host-to-switch authentication ● RBAC using RADIUS or TACACS+ authentication, authorization, and accounting (AAA) functions ● Management access ● Secure FTP (SFTP) ● Secure Shell Version 2 (SSHv2) ● Simple Network Management Protocol Version 3 (SNMPv3) implementing Advanced Encryption Standard (AES) ● Control-plane security Virtual Computing Environment (VCE) coalition Cisco MDS 9148 is supported as a VCE coalition option for Vblock1®, Vblock2®, Vblock™ 300, and Vblock™ 700 Compatibility Fibre Channel protocols ● FC-PH, Revision 4.3 (ANSI/INCITS 230-1994) ● FC-PH, Amendment 1 (ANSI/INCITS 230-1994/AM1 1996) ● FC-PH, Amendment 2 (ANSI/INCITS 230-1994/AM2-1999) ● FC-PH-2, Revision 7.4 (ANSI/INCITS 297-1997) ● FC-PH-3, Revision 9.4 (ANSI/INCITS 303-1998) ● FC-PI, Revision 13 (ANSI/INCITS 352-2002) ● FC-PI-2, Revision 10 (ANSI/INCITS 404-2006) ● FC-PI-3, Revision 2.1 (BSR INCITS 460-200x) ● FC-PI-4, Revision 8.0 (INCITS 450-2009) ● FC-FS, Revision 1.9 (ANSI/INCITS 373-2003) ● FC-FS-2, (BSR INCITS 424-200x) ● FC-FS-3, Revision 0.9 (BSR INCITS PN-1861-D-200x) ● FC-LS, Revision 1.62 (ANSI/INCITS 433-2007) ● FC-AL, Revision 4.5 (ANSI/INCITS 272-1996) ● FC-AL-2, Revision 7.0 (ANSI/INCITS 332-1999) ● FC-AL-2, Amendment 1 (ANSI/INCITS 332-1999/AM1-2003) ● FC-AL-2, Amendment 2 (ANSI/INCITS 332-1999/AM2-2006) ● FC-SW-2, Revision 5.3 (ANSI/INCITS 355-2001) ● FC-SW-3 , Revision 6.6 (ANSI/INCITS 384-2004) ● FC-SW-4, Revision 7.5 (ANSI/INCITS 418-2006) ● FC-SW-5, (BSR INCITS 461-200x) ● FC-GS, (ANSI INCITS 288-1999) ● FC-GS-3, Revision 7.01 (ANSI/INCITS 348-2001) ● FC-GS-4, Revision 7.91 (ANSI/INCITS 387-2004) ● FC-GS-5, (ANSI INCITS 427-2007) ● FC-GS-6, (BSR INCITS 463-200x) ● FC-BB, Revision 4.7 (ANSI/INCITS 342-2001) ● FC-BB-2, Revision 6.0 (ANSI/INCITS 372-2003) ● FC-BB-3, Revision 6.8 (ANSI/INCITS 414-2006) ● FCP, Revision 12 (ANSI/INCITS 269-1996) ● FCP-2, Revision 8 (ANSI/INCITS 350-2003) ● FCP-3, Revision 4 (ANSI/INCITS 416-2006) ● FCP-4, (BSR INCITS PN-1828-D-200x) ● FC-SB-2, Revision 2.1 (ANSI/INCITS 349-2001) ● FC-SB-3, Revision 1.6 (ANSI/INCITS 374-2003) ● FC-VI, Revision 1.84 (ANSI/INCITS 357-2002) ● FC-FLA, Revision 2.7 (INCITS TR-20-1998) ● FC-PLDA, Revision 2.1 (INCITS TR-19-1998) ● FC-Tape, Revision 1.17 (INCITS TR-24-1999) ● FC-MI, Revision 1.92 (INCITS TR-30-2002) ● FC-MI-2, Revision 2.6 (INCITS TR-39-2005) ● FC-SP, Revision 1.6 (ANSI/INCITS 426-2007) ● FC-DA, Revision 3.1 (INCITS TR-36-2004) ● SNPing (ANSI INCITS 443-2008) ● MIB-FA (INCITS/TR-32:2003 (R2008)) ● FAIS Revision 1 ● Extensive IETF-standards-based TCP/IP, SNMPv3, and Remote Monitoring (RMON) MIBs ● Class of service: Classes 2, 3, and F ● Fibre Channel standard port types: E, F, and FL ● Fibre Channel enhanced port types: SD, and TE Fabric services ● Name server ● Registered state change notification (RSCN) ● Login services ● Broadcast ● In-order delivery ● Name-server zoning Advanced services ● NPIV ● VSANs ● PortChannels ● NPV mode ● FlexAttach ● F-port trunking and channeling ● IVR Diagnostics and troubleshooting tools ● POST diagnostics ● Online diagnostics ● Internal loopbacks ● SPAN (remote SPAN not supported) ● Fibre Channel traceroute ● Fibre Channel ping ● Fibre Channel debug ● Cisco Fabric Analyzer ● Syslog ● Port-level statistics Management ● Access methods ◦ Out-of-band 10/100/1000 Ethernet port ◦ EIA/TIA-232 serial console port ◦ In-band management using IP over Fibre Channel ● Access protocols ◦ CLI ◦ SNMP ◦ SMI-S ● Security ◦ RBAC using RADIUS or TACACS+ authentication, authorization, and accounting (AAA) functions ◦ VSAN-based roles ◦ SSHv2 ◦ SNMPv3 Management applications ● Zero-Touch Installation deployment and provisioning with DHCP (scheduled for a future release of Cisco MDS 9000 NX-OS Software) ● Cisco MDS 9000 Family CLI ● Quick Configuration Wizard ● Cisco Device Manager ● Cisco DCNM for SAN Essentials Edition ● Cisco DCNM for SAN Advanced Edition (optional software package) Availability ● Nondisruptive In-Service Software Upgrade (ISSU) ● Process monitoring and stateful process restart ● Per-VSAN fabric services ● Redundant, hot-swappable power supplies and redundant, hot-swappable power supply and fan trays ● Hot-swappable SFP and SFP+ optics ● PortChannels aggregating up to 16 ports with redundant load balancing ● F-port channeling and trunking ● Online diagnostics Serviceability ● Configuration file management ● Call Home ● Port beaconing ● System LEDs ● SNMP traps for alerts Environmental ● Physical dimensions (H x W x D) of 1RU: 1.72 x 17.16 x 18.89 in. (4.47 x 43.59 x 47.98 cm) ● Weight of switch with dual power supplies: 22.2 lb (10 kg) ● Ambient operating temperature: 32 to 104°F (0 to 40°C) ● Ambient nonoperating temperature: -40 to 158°F (-40 to 70°C) ● Humidity (RH), ambient (noncondensing) operating: 10 to 90% ● Humidity (RH), ambient (noncondensing) nonoperating and storage: 5 to 95% ● Operating altitude: -197 to 6500 ft (-60 to 2000m) Power and cooling ● Power supplies (300W AC) (maximum of 2 per switch) ◦ AC Input: 100 to 240 VAC nominal (+/-10% for full range) ◦ Frequency: 50 to 60 Hz nominal (+/-3 Hz for full range) ◦ Maximum power consumption:
Многоуровневый коммутатор Cisco MDS 9148 c 48 портами Fiber Channel, поддерживающих линейную скорость до 8 Гбит/с.
71 900 ₽
Поставщик
Для физических лиц
Для юридических лиц
Ответим в течение 30 минут · Пн–Пт 09:00–19:00 МСК
Коммутатор Cisco MDS 9148
71 900 ₽
Поставщик
Для физических лиц
Для юридических лиц
Ответим в течение 30 минут · Пн–Пт 09:00–19:00 МСК
Многоуровневый коммутатор Cisco MDS 9148 c 48 портами Fiber Channel, поддерживающих линейную скорость до 8 Гбит/с.
Поставляется с 48 активированными портами 2, 4 и 8 Гбит/с., В комплекте 2 блока питания AC Cisco MDS 9148 Multilayer Fabric Switch - доступный, универсальный, легко управляемый коммутатор для сетей SAN начального уровня и для сетей отделов предприятий. Коммутатор, выполненный на специализированных ИС для сетей хранения типа «коммутатор на кристалле», обеспечивает выделенную полосу пропускания Fibre Channel 8 Гбит/с на каждом Cisco MDS 9148 поставляется в полной 48-портовой конфигурации. Minimum software requirements ●Cisco MDS 9000 NX-OS Software Release 5.0(1) supporting Cisco MDS 9148 and Cisco Fabric Manager ● Cisco MDS 9000 NX-OS Release 5.2(1) supporting Cisco DCNM for SAN ● Zero-touch installation capability is scheduled for a future release of Cisco MDS 9000 NX-OS Software Performance and port configuration ● Port speed: 8-, 4-, 2-, and 1-Gbps autosensing with 8 Gbps of dedicated bandwidth per port ● Buffer credits: Up to 128 for a group of 4 ports, with a default of 32 buffer credits per port and a maximum of 125 buffer credits for a single port in the group ● Ports per chassis: Up to 48 8-Gbps ports ◦ Base configuration with 16 ports; additional configurations for 32 and 48 ports available ◦ Upgrade ports in 8-port increments from any configuration with the port activation license ● PortChannel: Up to 16 ports in a PortChannel with automatic load balancing Security ● VSAN fabric isolation ● Intelligent packet inspection @ port level ● Hardware zoning by access control lists (ACLs) ● Extended broadcast zoning ● FC-SP switch-to-switch authentication ● FC-SP host-to-switch authentication ● RBAC using RADIUS or TACACS+ authentication, authorization, and accounting (AAA) functions ● Management access ● Secure FTP (SFTP) ● Secure Shell Version 2 (SSHv2) ● Simple Network Management Protocol Version 3 (SNMPv3) implementing Advanced Encryption Standard (AES) ● Control-plane security Virtual Computing Environment (VCE) coalition Cisco MDS 9148 is supported as a VCE coalition option for Vblock1®, Vblock2®, Vblock™ 300, and Vblock™ 700 Compatibility Fibre Channel protocols ● FC-PH, Revision 4.3 (ANSI/INCITS 230-1994) ● FC-PH, Amendment 1 (ANSI/INCITS 230-1994/AM1 1996) ● FC-PH, Amendment 2 (ANSI/INCITS 230-1994/AM2-1999) ● FC-PH-2, Revision 7.4 (ANSI/INCITS 297-1997) ● FC-PH-3, Revision 9.4 (ANSI/INCITS 303-1998) ● FC-PI, Revision 13 (ANSI/INCITS 352-2002) ● FC-PI-2, Revision 10 (ANSI/INCITS 404-2006) ● FC-PI-3, Revision 2.1 (BSR INCITS 460-200x) ● FC-PI-4, Revision 8.0 (INCITS 450-2009) ● FC-FS, Revision 1.9 (ANSI/INCITS 373-2003) ● FC-FS-2, (BSR INCITS 424-200x) ● FC-FS-3, Revision 0.9 (BSR INCITS PN-1861-D-200x) ● FC-LS, Revision 1.62 (ANSI/INCITS 433-2007) ● FC-AL, Revision 4.5 (ANSI/INCITS 272-1996) ● FC-AL-2, Revision 7.0 (ANSI/INCITS 332-1999) ● FC-AL-2, Amendment 1 (ANSI/INCITS 332-1999/AM1-2003) ● FC-AL-2, Amendment 2 (ANSI/INCITS 332-1999/AM2-2006) ● FC-SW-2, Revision 5.3 (ANSI/INCITS 355-2001) ● FC-SW-3 , Revision 6.6 (ANSI/INCITS 384-2004) ● FC-SW-4, Revision 7.5 (ANSI/INCITS 418-2006) ● FC-SW-5, (BSR INCITS 461-200x) ● FC-GS, (ANSI INCITS 288-1999) ● FC-GS-3, Revision 7.01 (ANSI/INCITS 348-2001) ● FC-GS-4, Revision 7.91 (ANSI/INCITS 387-2004) ● FC-GS-5, (ANSI INCITS 427-2007) ● FC-GS-6, (BSR INCITS 463-200x) ● FC-BB, Revision 4.7 (ANSI/INCITS 342-2001) ● FC-BB-2, Revision 6.0 (ANSI/INCITS 372-2003) ● FC-BB-3, Revision 6.8 (ANSI/INCITS 414-2006) ● FCP, Revision 12 (ANSI/INCITS 269-1996) ● FCP-2, Revision 8 (ANSI/INCITS 350-2003) ● FCP-3, Revision 4 (ANSI/INCITS 416-2006) ● FCP-4, (BSR INCITS PN-1828-D-200x) ● FC-SB-2, Revision 2.1 (ANSI/INCITS 349-2001) ● FC-SB-3, Revision 1.6 (ANSI/INCITS 374-2003) ● FC-VI, Revision 1.84 (ANSI/INCITS 357-2002) ● FC-FLA, Revision 2.7 (INCITS TR-20-1998) ● FC-PLDA, Revision 2.1 (INCITS TR-19-1998) ● FC-Tape, Revision 1.17 (INCITS TR-24-1999) ● FC-MI, Revision 1.92 (INCITS TR-30-2002) ● FC-MI-2, Revision 2.6 (INCITS TR-39-2005) ● FC-SP, Revision 1.6 (ANSI/INCITS 426-2007) ● FC-DA, Revision 3.1 (INCITS TR-36-2004) ● SNPing (ANSI INCITS 443-2008) ● MIB-FA (INCITS/TR-32:2003 (R2008)) ● FAIS Revision 1 ● Extensive IETF-standards-based TCP/IP, SNMPv3, and Remote Monitoring (RMON) MIBs ● Class of service: Classes 2, 3, and F ● Fibre Channel standard port types: E, F, and FL ● Fibre Channel enhanced port types: SD, and TE Fabric services ● Name server ● Registered state change notification (RSCN) ● Login services ● Broadcast ● In-order delivery ● Name-server zoning Advanced services ● NPIV ● VSANs ● PortChannels ● NPV mode ● FlexAttach ● F-port trunking and channeling ● IVR Diagnostics and troubleshooting tools ● POST diagnostics ● Online diagnostics ● Internal loopbacks ● SPAN (remote SPAN not supported) ● Fibre Channel traceroute ● Fibre Channel ping ● Fibre Channel debug ● Cisco Fabric Analyzer ● Syslog ● Port-level statistics Management ● Access methods ◦ Out-of-band 10/100/1000 Ethernet port ◦ EIA/TIA-232 serial console port ◦ In-band management using IP over Fibre Channel ● Access protocols ◦ CLI ◦ SNMP ◦ SMI-S ● Security ◦ RBAC using RADIUS or TACACS+ authentication, authorization, and accounting (AAA) functions ◦ VSAN-based roles ◦ SSHv2 ◦ SNMPv3 Management applications ● Zero-Touch Installation deployment and provisioning with DHCP (scheduled for a future release of Cisco MDS 9000 NX-OS Software) ● Cisco MDS 9000 Family CLI ● Quick Configuration Wizard ● Cisco Device Manager ● Cisco DCNM for SAN Essentials Edition ● Cisco DCNM for SAN Advanced Edition (optional software package) Availability ● Nondisruptive In-Service Software Upgrade (ISSU) ● Process monitoring and stateful process restart ● Per-VSAN fabric services ● Redundant, hot-swappable power supplies and redundant, hot-swappable power supply and fan trays ● Hot-swappable SFP and SFP+ optics ● PortChannels aggregating up to 16 ports with redundant load balancing ● F-port channeling and trunking ● Online diagnostics Serviceability ● Configuration file management ● Call Home ● Port beaconing ● System LEDs ● SNMP traps for alerts Environmental ● Physical dimensions (H x W x D) of 1RU: 1.72 x 17.16 x 18.89 in. (4.47 x 43.59 x 47.98 cm) ● Weight of switch with dual power supplies: 22.2 lb (10 kg) ● Ambient operating temperature: 32 to 104°F (0 to 40°C) ● Ambient nonoperating temperature: -40 to 158°F (-40 to 70°C) ● Humidity (RH), ambient (noncondensing) operating: 10 to 90% ● Humidity (RH), ambient (noncondensing) nonoperating and storage: 5 to 95% ● Operating altitude: -197 to 6500 ft (-60 to 2000m) Power and cooling ● Power supplies (300W AC) (maximum of 2 per switch) ◦ AC Input: 100 to 240 VAC nominal (+/-10% for full range) ◦ Frequency: 50 to 60 Hz nominal (+/-3 Hz for full range) ◦ Maximum power consumption:
Поставляется с 48 активированными портами 2, 4 и 8 Гбит/с., В комплекте 2 блока питания AC Cisco MDS 9148 Multilayer Fabric Switch - доступный, универсальный, легко управляемый коммутатор для сетей SAN начального уровня и для сетей отделов предприятий. Коммутатор, выполненный на специализированных ИС для сетей хранения типа «коммутатор на кристалле», обеспечивает выделенную полосу пропускания Fibre Channel 8 Гбит/с на каждом Cisco MDS 9148 поставляется в полной 48-портовой конфигурации. Minimum software requirements ●Cisco MDS 9000 NX-OS Software Release 5.0(1) supporting Cisco MDS 9148 and Cisco Fabric Manager ● Cisco MDS 9000 NX-OS Release 5.2(1) supporting Cisco DCNM for SAN ● Zero-touch installation capability is scheduled for a future release of Cisco MDS 9000 NX-OS Software Performance and port configuration ● Port speed: 8-, 4-, 2-, and 1-Gbps autosensing with 8 Gbps of dedicated bandwidth per port ● Buffer credits: Up to 128 for a group of 4 ports, with a default of 32 buffer credits per port and a maximum of 125 buffer credits for a single port in the group ● Ports per chassis: Up to 48 8-Gbps ports ◦ Base configuration with 16 ports; additional configurations for 32 and 48 ports available ◦ Upgrade ports in 8-port increments from any configuration with the port activation license ● PortChannel: Up to 16 ports in a PortChannel with automatic load balancing Security ● VSAN fabric isolation ● Intelligent packet inspection @ port level ● Hardware zoning by access control lists (ACLs) ● Extended broadcast zoning ● FC-SP switch-to-switch authentication ● FC-SP host-to-switch authentication ● RBAC using RADIUS or TACACS+ authentication, authorization, and accounting (AAA) functions ● Management access ● Secure FTP (SFTP) ● Secure Shell Version 2 (SSHv2) ● Simple Network Management Protocol Version 3 (SNMPv3) implementing Advanced Encryption Standard (AES) ● Control-plane security Virtual Computing Environment (VCE) coalition Cisco MDS 9148 is supported as a VCE coalition option for Vblock1®, Vblock2®, Vblock™ 300, and Vblock™ 700 Compatibility Fibre Channel protocols ● FC-PH, Revision 4.3 (ANSI/INCITS 230-1994) ● FC-PH, Amendment 1 (ANSI/INCITS 230-1994/AM1 1996) ● FC-PH, Amendment 2 (ANSI/INCITS 230-1994/AM2-1999) ● FC-PH-2, Revision 7.4 (ANSI/INCITS 297-1997) ● FC-PH-3, Revision 9.4 (ANSI/INCITS 303-1998) ● FC-PI, Revision 13 (ANSI/INCITS 352-2002) ● FC-PI-2, Revision 10 (ANSI/INCITS 404-2006) ● FC-PI-3, Revision 2.1 (BSR INCITS 460-200x) ● FC-PI-4, Revision 8.0 (INCITS 450-2009) ● FC-FS, Revision 1.9 (ANSI/INCITS 373-2003) ● FC-FS-2, (BSR INCITS 424-200x) ● FC-FS-3, Revision 0.9 (BSR INCITS PN-1861-D-200x) ● FC-LS, Revision 1.62 (ANSI/INCITS 433-2007) ● FC-AL, Revision 4.5 (ANSI/INCITS 272-1996) ● FC-AL-2, Revision 7.0 (ANSI/INCITS 332-1999) ● FC-AL-2, Amendment 1 (ANSI/INCITS 332-1999/AM1-2003) ● FC-AL-2, Amendment 2 (ANSI/INCITS 332-1999/AM2-2006) ● FC-SW-2, Revision 5.3 (ANSI/INCITS 355-2001) ● FC-SW-3 , Revision 6.6 (ANSI/INCITS 384-2004) ● FC-SW-4, Revision 7.5 (ANSI/INCITS 418-2006) ● FC-SW-5, (BSR INCITS 461-200x) ● FC-GS, (ANSI INCITS 288-1999) ● FC-GS-3, Revision 7.01 (ANSI/INCITS 348-2001) ● FC-GS-4, Revision 7.91 (ANSI/INCITS 387-2004) ● FC-GS-5, (ANSI INCITS 427-2007) ● FC-GS-6, (BSR INCITS 463-200x) ● FC-BB, Revision 4.7 (ANSI/INCITS 342-2001) ● FC-BB-2, Revision 6.0 (ANSI/INCITS 372-2003) ● FC-BB-3, Revision 6.8 (ANSI/INCITS 414-2006) ● FCP, Revision 12 (ANSI/INCITS 269-1996) ● FCP-2, Revision 8 (ANSI/INCITS 350-2003) ● FCP-3, Revision 4 (ANSI/INCITS 416-2006) ● FCP-4, (BSR INCITS PN-1828-D-200x) ● FC-SB-2, Revision 2.1 (ANSI/INCITS 349-2001) ● FC-SB-3, Revision 1.6 (ANSI/INCITS 374-2003) ● FC-VI, Revision 1.84 (ANSI/INCITS 357-2002) ● FC-FLA, Revision 2.7 (INCITS TR-20-1998) ● FC-PLDA, Revision 2.1 (INCITS TR-19-1998) ● FC-Tape, Revision 1.17 (INCITS TR-24-1999) ● FC-MI, Revision 1.92 (INCITS TR-30-2002) ● FC-MI-2, Revision 2.6 (INCITS TR-39-2005) ● FC-SP, Revision 1.6 (ANSI/INCITS 426-2007) ● FC-DA, Revision 3.1 (INCITS TR-36-2004) ● SNPing (ANSI INCITS 443-2008) ● MIB-FA (INCITS/TR-32:2003 (R2008)) ● FAIS Revision 1 ● Extensive IETF-standards-based TCP/IP, SNMPv3, and Remote Monitoring (RMON) MIBs ● Class of service: Classes 2, 3, and F ● Fibre Channel standard port types: E, F, and FL ● Fibre Channel enhanced port types: SD, and TE Fabric services ● Name server ● Registered state change notification (RSCN) ● Login services ● Broadcast ● In-order delivery ● Name-server zoning Advanced services ● NPIV ● VSANs ● PortChannels ● NPV mode ● FlexAttach ● F-port trunking and channeling ● IVR Diagnostics and troubleshooting tools ● POST diagnostics ● Online diagnostics ● Internal loopbacks ● SPAN (remote SPAN not supported) ● Fibre Channel traceroute ● Fibre Channel ping ● Fibre Channel debug ● Cisco Fabric Analyzer ● Syslog ● Port-level statistics Management ● Access methods ◦ Out-of-band 10/100/1000 Ethernet port ◦ EIA/TIA-232 serial console port ◦ In-band management using IP over Fibre Channel ● Access protocols ◦ CLI ◦ SNMP ◦ SMI-S ● Security ◦ RBAC using RADIUS or TACACS+ authentication, authorization, and accounting (AAA) functions ◦ VSAN-based roles ◦ SSHv2 ◦ SNMPv3 Management applications ● Zero-Touch Installation deployment and provisioning with DHCP (scheduled for a future release of Cisco MDS 9000 NX-OS Software) ● Cisco MDS 9000 Family CLI ● Quick Configuration Wizard ● Cisco Device Manager ● Cisco DCNM for SAN Essentials Edition ● Cisco DCNM for SAN Advanced Edition (optional software package) Availability ● Nondisruptive In-Service Software Upgrade (ISSU) ● Process monitoring and stateful process restart ● Per-VSAN fabric services ● Redundant, hot-swappable power supplies and redundant, hot-swappable power supply and fan trays ● Hot-swappable SFP and SFP+ optics ● PortChannels aggregating up to 16 ports with redundant load balancing ● F-port channeling and trunking ● Online diagnostics Serviceability ● Configuration file management ● Call Home ● Port beaconing ● System LEDs ● SNMP traps for alerts Environmental ● Physical dimensions (H x W x D) of 1RU: 1.72 x 17.16 x 18.89 in. (4.47 x 43.59 x 47.98 cm) ● Weight of switch with dual power supplies: 22.2 lb (10 kg) ● Ambient operating temperature: 32 to 104°F (0 to 40°C) ● Ambient nonoperating temperature: -40 to 158°F (-40 to 70°C) ● Humidity (RH), ambient (noncondensing) operating: 10 to 90% ● Humidity (RH), ambient (noncondensing) nonoperating and storage: 5 to 95% ● Operating altitude: -197 to 6500 ft (-60 to 2000m) Power and cooling ● Power supplies (300W AC) (maximum of 2 per switch) ◦ AC Input: 100 to 240 VAC nominal (+/-10% for full range) ◦ Frequency: 50 to 60 Hz nominal (+/-3 Hz for full range) ◦ Maximum power consumption:
Многоуровневый коммутатор Cisco MDS 9148 c 48 портами Fiber Channel, поддерживающих линейную скорость до 8 Гбит/с.
71 900 ₽
Поставщик
Для физических лиц
Для юридических лиц
Ответим в течение 30 минут · Пн–Пт 09:00–19:00 МСК
